The Will Hunt (London) Designs Page

Will Hunt (London) Green Plate certificate
Will Hunt (London) Brown Plate certificate
Will Hunt (London) Black Plate certificate

The Will Hunt (London) Green Plate Cue: All of our Green Plate cues are serialised and have been since October 2016.

 

 Our Green Plate cues are all made from AAA-Grade Ash, Maple, Ebony and Rosewood Splices and are very high-standard cues.

 

 Originally produced as the affordable line of Hunt & O'Byrne cues, dropped entirely in the 1990's Will Hunt- London, brought back as totally handmade cues for Hunt & Osborne and continued into Will Hunt (London), they are one of the best cues on the market.

The Will Hunt (London) Brown Plate Cue: These are a new line of Snooker Cue from Will Hunt (London) and are available exclusively from Li Jing Shan of Shenzhen, China.

 

 They are hand-made and the AAA-Grade shafts are specially selected for their dexterity and even grain at the tip-end and sides.

 They are perfectly suitable for Snooker and Chinese 8 Ball.

The Will Hunt (London) Black Plate Cue has been infamous for its quality since Will started his career.

 

We use the highest quality timber possible. All Ash and Maple used on Black Plate cues will ave received the AAAA grade, Ebony and Rosewoods selected for the Black Plate range must be faultless both structurally and aesthetically. You will not find a Will Hunt (London) Black Plate Cue that isn't firm with just the right amount of dexterity for accurate screw shots as well as straight pots, and perfectly even chevrons, straight side grain and a clean belly.

 

Current Black Plate Cues are as good as the Black Plate cues from Hunt & O'Byrne, Will Hunt - London and Hunt & Osborne - if not better.

Will Hunt (London) Snooker Cues feature Will Hunt joints only and have done since 2014. Some of you may have Will Hunt (London) cues with a different base-joint. Those joints are now out of circulation in our cues.

All of our cues are treated thoroughly to protect them as much as possible against changes in climate. Wood is an alive material and changes not just with age but with temperature and humidity too. We are always learning new things about the woods we use and often advance the way we finish our cues.

 

On the left you can see a wonderful example of the final finish we apply to the butts of our cues, below you can see a stunning example of an AAA-Grade North American Ash shaft (the 147 Green Plate Cue) after oiling. 

A1: 4 Lower Splices of AAA-Grade West-African Ebony on either a AAA-Grade North-American Ash or AAA-Grade Canadian Maple shaft.

A2: The 3/4 version of the above. 3/4 joint is Will Hunt (London)'s own design and cast with solid brass.

B1: 4 Lower Splices of high-quality striped Rosewood with 4 undyed Canadian Maple veneers.

B2: The 3/4 version of the above. 

C1: 4 Lower Splices of high-quality Rosewood with 4 Canadian Maple veneers.

C2: The 3/4 version of the above.

D1: A single front splice of high-quality Striped Rosewood on an undyed Canadian Maple veneer.

E1: A single front splice of Rosewood on a Canadian Maple undyed veneer.

F1: A single front splice of AAA-Grade Burr on an undyed Canadian Maple veneer.

G1: A single front splice of AAA-Grade Amboyna Burr on an undyed Canadian Maple veneer.

  Amboyna Burr is currently out of stock however when it becomes available we will obtain it.

H1: A single front splice of AAA-Grade Snakewood on an undyed Canadian Maple veneer.

I1: 4 long lower splices of Striped Rosewood with undyed Canadian Maple veneers.

J1: 4 long lower splices of Ripple Walnut.

K1: 4 lower splices of Paduak with undyed Canadian Maple veneers.

L1: 4 lower splices of AAA-Grade Birdseye Maple.

L2: The 3/4 version of the above.

M1: 4 Lower Splices of AAA-Grade Bacote on undyed Canadian Maple veneers.

M2: The 3/4 version of the above.

N1: 4 lower splices of AAA-Grade Cocobolo with undyed Canadian Maple veneers.

N2: The 3/4 version of the above.

O1: This design features 4 lower splices of Macassar Ebony on undyed Canadian Maple veneers.

O2: The 3/4 version of the above.

P1: This design features 4 lower splices of AAA-Grade Tulip Wood on undyed Canadian Maple veneers.

P2: The 3/4 version of the above.

Tulip wood is currently unavailable due to a shortage of the tree.

Q1: 4 lower splices of AAA-Grade Olive Wood , sometimes on undyed Canadian Maple veneers.

Q2: The 3/4 version of the above.

R1: 4 Lower Splices of Spalted Tamarind.

R2: The 3/4 version of the above.

S1: 4 lower splices of AAA-Grade Wenge with undyed Canadian Maple veneers.

S2: The 3/4 version of the above.

T1: 4 lower splices of Purple Heart with undyed Canadian Maple veneers.

T2: The 3/4 version of the above.

U1: 4 lower splices of Pink Ivory.

U2: The 3/4 version of the above.

V1: 4 lower splices of Palm with undyed Canadian Maple veneers.

V2: The 3/4 version of the above.

4 Lower splices of Black and White Ebony with undyed Canadian Maple veneers. If in stock could be available as a 3/4 cue.

W1: 4 lower splices of Tigre Caspi.

W2: The 3/4 version of the above.

X1: 4 lower splices of Osage Orange.

X2: The 3/4 version of the above.